locations

V&S Taunton Galvanizing, LLC

Directions

ADDRESS: 585 John Hancock Road, Taunton, MA 02780

TRAVELING FROM:

EAST: Most of the Principal highways intersect with either Route 24 or Route 495. When on Route 24, travel either North or South to Exit 14 where it intersects Route 495. Take Route 495 North to Exit 9 and go left at the end of the exit ramp. Travel ¼ mile and take the first right into the Myles Standish Industrial Park.

WEST: Take the Massachusetts Turnpike Route 90, East to Exit 11A, which intersects Route 495. Travel South on Route 495 to Exit 9, Bay Street Taunton. At the end of the exit go right and take the first right into the Myles Standish Industrial Park. Travel 1-1/3 miles and take the last left, which is John Hancock Road. Travel 1 mile down and the plant is on the right side across from the “New England Pottery” building.

SOUTH: Take Route 95 North to Exit 6, which intersects Route 495, and travel South on Route 495 to Exit 9, Bay Street Taunton. Also, take Route 24 North to Exit 14, which intersects Route 495, and go north on 495 to Exit 9. Most of the Principal highways intersect with either Route 24 or Route 495. When on Route 24, travel either North or South to Exit 14 where it intersects Route 495. Take Route 495 North to Exit 9 and go left at the end of the exit ramp. Travel ¼ mile and take the first right into the Myles Standish Industrial Park.

NORTH: Take Route 495 South to Exit 9, which is Bay Street Taunton. At the end of the exit go right, and go right again into the Myles Standish Industrial Park. Travel 1-1/3 miles and take the last left, which is John Hancock Road. Travel 1 mile down and the plant is on the right side across from the “New England Pottery” building.

Also from North of Taunton, Route 95 South to Exit 6, which intersects Route 495, then south on Route 495 to Exit 9. Route 93 South can also be taken, then connect to Route 24 South to Exit 14, which intersects Route 495. Take Route 495 North to Exit 9, at the end of the exit go left and travel ¼ mile and then take the first right into the Myles Standish Industrial Park.

Back to V&S Taunton Galvanizing LLC
View Map

home | products & services | about us | showcase | the hot dip galvanizing process | specifications | news & events | locations
© 2000-2010 Voigt & Schweitzer, USA, All Rights Reserved